Novaxnetwork explains EPC in affiliate marketing as the average commission generated per tracked click. EPC stands for earnings per click. If 1,000 referred clicks generate $300 in affiliate commission, the EPC is $0.30 per click.
That average helps compare offers with different payouts and conversion rates. It does not mean every click earns $0.30, and it does not establish your profit. To use EPC properly, check its unit, earnings status, click definition, and reporting period.
What does EPC actually measure?
EPC connects two outcomes: the traffic you refer and the commission attributed to it. Some clicks produce no payable action. Others produce a lead, sale, or another qualifying event. Dividing the resulting commission across the counted clicks gives an average.
Use affiliate commission in the calculation. If referred customers spend $10,000 and your commission is $300, the relevant earnings amount is $300. Using the full customer purchase value would measure sales revenue per click rather than your commission per click.
EPC is also an observed performance measure, not necessarily a payment arrangement. An offer can pay per approved lead while its report shows the resulting earnings per click.
How is EPC calculated?
EPC per click = affiliate commission ÷ counted clicks
Consider a hypothetical campaign with 1,000 referred clicks and 60 approved conversions paying $5 each. Approved commission is $300, so approved EPC is $300 ÷ 1,000 = $0.30.
For a fixed payout, the same result can be expressed as:
EPC = approved conversion rate × payout per approved conversion
Here, 60 approved conversions from 1,000 clicks produce a 6% rate. Multiplying 0.06 by $5 gives $0.30. Use the decimal form of the percentage in the multiplication.
If commissions vary between conversions, calculate earnings from the actual commission amounts. The guide to calculating EPC and conversion rate covers the calculation process in more detail.
All figures in this guide are illustrative. They are not Novaxnetwork campaign results, advertised offer rates, or earnings forecasts.
When there are clicks but no commission, EPC is zero for the earnings status and period being measured. With no counted clicks, the ratio cannot be calculated. A blank field may therefore require a different interpretation from a genuine zero, depending on how the report handles missing data.

Is EPC measured per click or per 100 clicks?
Check the reporting definition before comparing numbers. The Performance Marketing Association’s 2022 glossary includes an earnings-per-hundred-clicks definition for EPC. That convention produces a number 100 times larger than the per-click calculation.
| Reporting unit | Calculation using $300 and 1,000 clicks | Displayed value |
|---|---|---|
| Earnings per click | $300 ÷ 1,000 | $0.30 |
| Earnings per 100 clicks | ($300 ÷ 1,000) × 100 | $30 |
These values describe identical earnings from identical traffic. A displayed EPC of $30 should not be interpreted as $30 for each click unless the report explicitly uses that unit.
Record the currency too. Comparing figures in different currencies requires conversion to a common currency before drawing conclusions.
How is EPC different from payout, CPC, and conversion rate?
| Metric | What it describes | Example |
|---|---|---|
| Payout | Commission attached to a qualifying event | $5 per approved conversion |
| Conversion rate | Share of counted clicks producing the specified event | 60 approved conversions ÷ 1,000 clicks = 6% |
| EPC | Commission averaged across counted clicks | $300 ÷ 1,000 clicks = $0.30 |
| Advertising CPC | Advertising spend averaged across paid ad clicks | $200 ÷ 1,000 paid clicks = $0.20 |
Understanding CPA in affiliate marketing helps separate an action-based payout from the average earnings those actions generate across traffic.
A higher payout can still produce lower EPC. An illustrative $10 offer converting 2% of clicks earns $0.20 per click, while a $5 offer converting 6% earns $0.30. The larger commission per conversion does not settle the comparison.
Does a high EPC mean a profitable campaign?
EPC measures earnings before you subtract traffic and operating costs. When commission and costs use the same traffic population, subtracting acquisition costs helps establish the contribution left from that traffic.
If 1,000 paid clicks cost $200 and generate $300 in approved commission, $100 remains before other expenses. At $350 in advertising spend, the same commission leaves a $50 advertising loss despite the unchanged $0.30 EPC.
Check the denominator before comparing EPC with CPC. An outbound offer click and an incoming advertising click can be different events. If only half of incoming visitors follow the offer link, earnings per offer click cannot be compared directly with cost per incoming click.
For example, $300 generated from 1,000 offer clicks may have required 2,000 incoming paid clicks. Earnings per incoming click would be $0.15. Use the full traffic journey when deciding what acquisition cost the campaign can support.

Why do pending and approved EPC differ?
The earnings status changes the numerator. A report containing pending commission can show a higher value than one containing only approved commission, even when both use the same click count.
Suppose the example campaign has $300 approved and another $90 awaiting review. Including both produces $0.39 per click across 1,000 clicks. Counting approved commission alone produces $0.30.
The pending amount is not automatically a future payment. Check how rejected conversions, refunds, adjustments, and later approvals affect the report. Paid commission is another status, reflecting settlement rather than simply approval.
Check which types of earnings the field includes as well. One calculation may include a performance bonus or click-based commission, while another includes only action-based commission. Reconcile the underlying amounts before assuming a difference between reports means conversions were lost.
Use explicit labels such as “approved EPC” or “EPC including pending commission” in your own analysis. This makes differences between reports easier to explain.
Which clicks belong in the denominator?
Two dashboards can report different EPC values because they count different clicks. One may use all tracked referrals; another may use unique clicks according to its own deduplication rules.
With $300 commission, 1,000 total clicks produce $0.30 EPC. Using 800 unique clicks produces $0.375. The arithmetic differs because the denominator differs; neither value can be compared fairly without that context.
When combining your own placements, divide total commission by total relevant clicks. A placement earning $50 from 100 clicks has $0.50 EPC. Another earning $90 from 900 clicks has $0.10 EPC. Together, they earn $140 from 1,000 clicks, or $0.14 EPC.
Simply averaging $0.50 and $0.10 would give $0.30 and overstate the combined result. Weighting happens naturally when you calculate from the summed earnings and click counts.
Read EPC alongside traffic volume
A higher average can accompany lower total earnings. Suppose one period generates $2,000 from 10,000 clicks, producing $0.20 EPC. Another generates $800 from 2,000 clicks, producing $0.40 EPC. The second period has the stronger average, but the first produces more commission.
The business decision also requires costs and available capacity. A small placement with strong EPC may be useful without being able to supply the volume needed for the whole campaign. Review how much eligible traffic it can deliver and what happens to acquisition costs as spending expands.
Keep total approved commission, acquisition spending, and contribution visible beside EPC. This prevents an improvement in the ratio from hiding a decline in the amount the campaign contributes. For organic traffic, include the resources used to create and maintain the audience in your broader cost evaluation.

Why might an offer’s advertised EPC differ from yours?
A program-wide figure may describe a mixture of traffic sources, audiences, locations, devices, and commercial terms. Your campaign can have a different mix. Find out which activity the displayed figure includes before treating it as a planning input.
Use sub-ID tracking in affiliate marketing to examine your own placements and campaign versions. Compare segments where the click definitions, earnings status, and observation periods are consistent.
Sample size matters too. One $20 commission from 20 clicks produces $1 EPC. That is a real calculation, but one payable event supports it. A $0.30 result from 1,000 clicks and many approved events provides a different amount of evidence.
An offer-level EPC can help you select something to investigate. Your own measured results are needed to decide whether its performance supports your traffic costs and business requirements.
How does the reporting period affect EPC?
A short reporting window may contain clicks whose resulting conversions have not happened or been approved yet. Check the attribution window in affiliate marketing and allow an appropriate observation period for the offer’s conversion and validation process.
Also ask how dates are assigned. A report dividing commissions recorded this week by clicks recorded this week may combine earnings from earlier referrals with newer traffic. That is a period-based summary, which may differ from following one group of clicks through its eventual earnings.
This distinction becomes particularly relevant when comparing RevShare and CPA affiliate marketing. Later eligible revenue can change the cumulative earnings attributed to an earlier customer group.
Label whether your figure is a daily account summary, a recent program average, or earnings accumulated by a defined referral group. Consistent labels prevent different views from being treated as interchangeable.
What should you check when EPC falls?
Begin with the two inputs: earnings and clicks. More low-intent traffic can lower the average; fewer approved actions or lower commissions can do the same. A change in reporting filters can also change the displayed result.
Check payout changes, conversion completion, pending reviews, and adjustments. Then inspect the traffic mix and reconcile click counts with the earnings being attributed to them. If records appear incomplete, investigate the reporting flow before changing the campaign.
Evaluate improvements on comparable traffic and allow results to mature. Increasing the displayed EPC by excluding unsuccessful clicks from your calculation would not improve the underlying campaign.

Frequently asked questions
What is a good EPC in affiliate marketing?
There is no single benchmark that establishes profitability across offers. Assess EPC against acquisition costs on the same click basis, then account for operating expenses, validation, and payment timing.
Does EPC mean I am paid for every click?
No. EPC is an average performance measure. A campaign paying per lead or sale can still report earnings per click even when most clicks generate no commission.
Can EPC change after a campaign ends?
Yes. Later conversions, approvals, reversals, or eligible recurring commissions can change the earnings attributed to earlier traffic. The effect depends on the offer terms and report configuration.
Should I always choose the offer with the highest EPC?
Check the unit, sample size, traffic mix, earnings status, and reporting period first. Then compare the earnings your own eligible traffic generates with its acquisition costs and the offer’s commercial terms.
